Compact design: trolley,water tank,power source can be selected according to applications.
Microprocessor control: simple operation,more perfect welding performance.
Comprehensive protecting function: with the protection of overvoltage,under voltage,default phase,against lightning stroke,overcurrent,over heat etc.
The unique air duct design: failure rate greatly reduced,extending the service life of the machine.
Unitization design: the machine consists of 4 units-control unit,input unit,inverter unit,output unit. Only need replace the related unit power board for maintenance,any professional debugging is unnecessary.
|
Model |
CUT100C |
|
Input power voltage（V） |
AC380V±15% 3PH |
|
Input voltage frequency |
50/60 |
|
Rated input power capacity（KVA) |
15.1 |
|
No-load voltage（V） |
285 |
| Output current range（A） | 5-100 |
|
Duty cycle(%) |
60 |
|
Power factor |
0.93 |
|
Insulation class |
F |
|
Protection class |
IP21S |
|
Arc- striking |
Non-Touch |
|
Air pressure ( M Pa) |
0.6 |
|
Suggested cutting thickness(MM) |
25 |
|
Cutting Thickness ( mm) |
40 |
| Weight（KG） | 28.3 |
|
Dimension（mm |
500×280×435 |
Metal workshops
Construction industry
1.P80 torch with 5m cable
2.Earth clamp with 2m cable
