Advanced design, high inverter frequency, high duty cycle, low energy consumption.
Portable with light weight in shop or at job site
Much more economical and more efficient than flame cutting machine by using the compressed air as cutting source.
Narrow cutting seam, smooth appearance, less transmutation
Widely used in mild steel, stainless steel, titanium, aluminum cutting and so on.
Compatible with network or generator use
Auto-protection against over voltage and over heat
|
Model |
CUT40E |
|
|
Input Voltage(V) |
AC110±15% 1PH |
AC220V±15% 1PH |
|
Input voltage frequency |
50/60 |
|
|
Rated input power capacity（KVA) |
3.5 |
4.9 |
|
Rated input current （A) |
31.8 |
22.3 |
|
No-load voltage（V） |
222 |
|
|
Output current range（A） |
20-30 |
20-40 |
|
Rated output voltage(V |
92 |
96 |
|
Duty cycle （%） |
60 |
|
|
Power factor |
0.93 |
|
|
Insulation class |
F |
|
|
Protection class |
IP21S |
|
|
Arc- striking |
Touch |
|
|
Air pressure ( M Pa) |
0.35-0.5 |
|
|
Gas flow（L/min） |
|
|
|
Suggested cutting thickness（mm） |
5 |
8 |
|
Cutting Thickness ( mm) |
10 |
12 |
|
Weight（KG） |
6.5 |
|
|
Dimension（mm） |
356x153x225 |
|
Metal workshops
Construction industry
1.PT-31 torch with 5m cable
2.Earth clamp with 2m cable
3.Gas regulator
